AiMonkeyGRIP manual

Preparation

Necessary tools:
Hex key No. 3

Assemble

Remove screws, open arms. Pull in the handlebars and close your arms

Put on

Screw in screws and align Tighten until the gap disappears

Tip!

TIP!

If the AiMonkeyGRIP lowers slightly while driving or you want to protect the handlebars, you can use fabric adhesive tape
Glue in 1 layer with an overlap of approx. 1 cm and then mount the AiMonkeyGRIP. This way it stays in place.

You need your handlebar diameter in the middle right next to the stem.

The stem width, the widest point. Take one size larger for the same stem width dimensions.

Whether Garmin®, GoPro®, Wahoo®, Sigma® or attached with a rubber band, O-ring, you can mount it on the BASE. Achte bei der BASE auf die Buchstaben (G, K, M), sie geben dir ein Hinweis zur Kompatibilität. In the BASE, pay attention to the letters (G, K, M), they give you an indication of compatibility. Further information can be found on the compatibility list.

At least the GRIP and a BASE.

GRIP – The holder for the handlebars to keep your devices in position

BASE – To attach the devices, the BASE is attached to your GRIP with ONE click

HOLDER – (optional) so you can mount one more device.

  • You need 1 GRIP per bike.

  • Note that every bike can have different handlebar dimensions and choose the GRIP accordingly.

Compatibility list

BASE K

Necessary bike computer mount
K-Edge>® Replace Insert Kit (Wahoo, Sigma and Garmin)

Compatible devices
For example: Wahoo, Sigma and Garmin bike computers that can be mounted with a K-Edge® mount

BASE LONG
Up to 3 devices can be mounted with HOLDER M or G

BASE SHORT
Up to 2 devices can be mounted with HOLDER M or G

HOLDER G
(Compatible with all BASE)
Extension for 1 additional device mounted with a GoPro®-compatible mount.

BASE M

Necessary bike computer mount
Rubber strap and O-ring mounts

Compatible devices
Devices that can be attached to the bike with rubber bands or O-rings

BASE LONG
Up to 3 devices can be mounted with HOLDER M or G

BASE SHORT
Up to 2 devices can be mounted with HOLDER M or G

HOLDER M
(Compatible with all BASE)
Extension for 1 additional device that is mounted with rubber bands or O-ring attachment.